Formani One Pull Handle

Dimensions:  Length 425m, Width 25mm, Projection 62mm, CC 400mm

Concealed Fixings: PBI400NP

Bolt Through Fixings: PBI400PS

Back To Back Set with Fixings: PBI400PA

Formani Eclipse Pull Handle - Square Corners

Dimensions:  Length 523m, Width 23mm, Projection 55mm, CC 500mm

Concealed Fixings: DR500NP

Bolt Through Fixings: DR500PS

Back To Back Set with Fixings: DR500PA

This complete Entry door set includes a pair of steel tKnobler door levers with 4.8mm thick escutcheon plates, a TK thumb latch for the interior side of the door, and a cover plate for the edge of the door. Shown here in the blackened steel finish.

The tKnobler door pulls are offered in three sizes: 60mm DIA, 38mm DIA, or 32mm DIA.

Locking hardware includes an Accurate 9125 Series mortise lock, an Accurate 7200 Series deadlock, and a Baton AC31 keyed cylinder. Standard backset for the locks is 63.5mm; custom backsets are available if needed.

Standard finish for the tKnobler + Plate Entry door set is blackened steel, sealed with oil & wax. The jamb strike for all entry sets has a US10B oil-rubbed bronze finish. The 60mm DIA tKnobler + Plate Entry door set can be ordered in a powder coated finish, for better corrosion resistance.

Optional powder coat finishes (available for 60mm DIA tKnobler sets only):  Satin black, gloss red, or gloss white.

All Entry sets are also available in stainless steel with a satin bead-blasted finish. The 32mm DIA tKnobler set is available in solid bronze with an oil-rubbed finish.

*Please provide the required door thickness and handing information when ordering.

"Euclide" is a structural, masculine and geometrical collection.The mixture of the round and square lines gives to the pieces a glimpse of clumsiness which makes them irresistibly adorable.
The door handle collection is built with a circle inscribed in a square. In geometry, the incircle or inscribed circle of a polygon is the largest circle contained in this polygon; it touches and is tangent to the all sides. The center of the incircle is called the incenter.

Pull handle: 310 x 75 mm (LxP)
Plate: 420 x 80 mm (HxW)

Note:

The handle comes in a pair

Made from wrought iron and painted black this door pull has beautiful curved lines and textures. 500mm in length.

Comes as a pair

Dimensions:

Note:

The handle comes in a pair

Made from Brushed Stainless Steel and Compressed Wood this stylish door pull comes in two sizes and two different timber finishes.

A decorative pull handle made from solid brass available in two beautiful finishes.

The handle comes in a pair.

Dimensions:

An offset solid brass door pull in a brass sulphate finish available in two sizes of 600mm and 800mm.

Note:

The handle comes in a pair

An offset decorative pull handle made from solid brass available in two beautiful finishes.

The handle comes in a pair.

Dimensions:

Stylish 750mm long offset door pull made from J-Cerad and Aluminium. Available in two beautiful finishes.

The handle comes in a pair

Dimensions:

Stylish 750mm long square door pull made from J-Cerad and Aluminium. Available in two beautiful finishes.

The handle comes in a pair

Dimensions:

Contemporary recessed sliding door pull suitable for 40 - 45mm doors.

Made from Zinc Die Casting,  Aluminium & ABS Resin.

Available in two sizes and four stylish finishes.

Dimensions:

A modern stylish sliding door pull to suit doors 40 - 60mm. Made from die cast zinc it is available in 19 beautiful finishes.

Dimensions:

The T3 is a modern handle with square lines available in three stylish finishes. Made from solid die cast zinc it comes with a passage lock. Also available with privacy set or cylinder.

Dimensions:

The Ballet Door Pull is made from solid brass, either in a Satin Polished Brass or Brown Bronze finish. Available in two sizes and can be fitted vertically or horizontally.

The Ballet Edge Pull is made from solid brass, either in a Satin Polished Brass or Brown Bronze finish. Suitable for 40mm sliding doors.

The Ballet Dressing Flush Pull is made from solid brass, either in a Satin Polished Brass or Brown Bronze finish. Suitable for 30+mm sliding doors.

The Tools Pull Handle is made from solid brass, either with a lacquered polished brass finish or polished nickel finish. The collection was inspired by the geometrical shape of wrenches, with straight surfaces reflecting the light while the gentle structure feels comfortable to the hand- like a beautiful set of quality tools.

Dimensions: 300 x 58 mm (WxP)

Other finishes are available on demand.

The basic parts of the Divergence collection are made from black anodised aluminium. The sleeves of the handle are available in brass or aluminium. Wood, marble and glass are also available.

Sold as a pair

Dimensions:

Lever:  L-150mm  x D-63mm

Rose:  45 x 45 x 5mm

Imagined as "bubble dreams", India Mahdavi's Bubbles collection  embodies the alliance between simplicity and femininity, through the intersection of pure and absolute geometric shapes: the sphere and the cylinder.

Specifications

L 360mm  W 47mm  D 86mm

Other finishes are available on demand

"Euclide" is a structural, masculine and geometrical collection.The mixture of the round and square lines gives to the pieces a glimpse of clumsiness which makes them irresistibly adorable.
The door handle collection is built with a circle inscribed in a square. In geometry, the incircle or inscribed circle of a polygon is the largest circle contained in this polygon; it touches and is tangent to the all sides. The center of the incircle is called the incenter.

Made from Solid Brass with a polished nickel finish.

Sold as a pair

Dimensions-   L: 120mm   x    D: 66m