Galets (Pebbles)

This collection was born in 1965 after Louis Hamburger brought some pebbles back from his travelling in Portofino, Italy.

This naturally ergonomic element from nature, eroded by the sea for years is very pleasant in hand. The touch of the pebble is soft and comfortable.

This collection is sand casted in a traditional way and may present some surface bites. These are a guarantee of craftsmanship and make each item a unique piece. Leave time for the patina to appear, it will embellish your pebble. We recommend the polished brass
decor and other non-coated treatments due to the surface bites.

A beautiful door pull which is 195mm in length and a projection of 60mm

Pictured in Satin Nickel it is available in a range of beautiful finishes

This complete Entry door set includes a pair of steel tKnobler door levers with 4.8mm thick rosettes, a TK thumb latch for the interior side of the door, and a cylinder lock for the external side of the door. Shown here in the blackened steel finish.

The tKnobler door pulls are offered in three sizes: 60mm DIA, 38mm DIA and 32mm DIA.

Locking hardware includes an Accurate 9125 Series mortise lock, an Accurate 7200 Series deadlock, and a Baton AC31 keyed cylinder. Standard backset for the locks is 63.5mm; custom backsets are available if needed.

Standard finish for the tKnobler + Rose Entry door set is blackened steel, sealed with oil & wax. The jamb strike for all Entry sets has a US10B oil-rubbed bronze finish. The 60mm DIA tKnobler + Rose door set can be ordered in a powder coated finish, for better corrosion resistance.

Optional powder coat finishes (available for 60mm DIA tKnobler sets only):  Satin black, gloss red, or gloss white.

All Entry sets are also available in stainless steel with a satin bead-blasted finish. The 32mm DIA tKnobler set is available in solid bronze with an oil-rubbed finish.

*Please provide the required door thickness and handing information when ordering. For questions concerning door handing please view this illustration.

This complete Privacy  door set includes a pair of steel tKnobler door levers with 4.8mm thick rosettes, a TK thumb latch for the interior side of the door, and a coin turn for the exterior side of the door. Shown here in the blackened steel finish.

The tKnobler door pulls are offered in three sizes: 60mm DIA, 38mm DIA and 32mm DIA.

Locking hardware includes an Accurate 9125 Series mortise lock, an Accurate 7200 Series deadlock, and a Baton AC31 keyed cylinder. Standard backset for the locks is 63.5mm; custom backsets are available if needed.

Standard finish for the tKnobler + Rose Privacy door set is blackened steel, sealed with oil & wax. The jamb strike for all Entry sets has a US10B oil-rubbed bronze finish. The 60mm DIA tKnobler + Rose door set can be ordered in a powder coated finish, for better corrosion resistance.

Optional powder coat finishes (available for 60mm DIA tKnobler sets only):  Satin black, gloss red, or gloss white.

All Privacy sets are also available in stainless steel with a satin bead-blasted finish. The 32mm DIA tKnobler set is available in solid bronze with an oil-rubbed finish.

*Please provide the required door thickness and handing information when ordering. For questions concerning door handing please view this illustration.

This complete Passage door set includes a pair of steel tKnobler door levers with 4.8mm thick plates. Shown here in the blackened steel finish.

The tKnobler door pulls are offered in three sizes: 60mm DIA, 38mm DIA, or 32mm DIA.

Standard finish for the tKnobler + Plate Passage door set is blackened steel, sealed with oil & wax. The jamb strike for all entry sets has a US10B oil-rubbed bronze finish. The 60mm DIA tKnobler + Plate Entry door set can be ordered in a powder coated finish, for better corrosion resistance.

Optional powder coat finishes (available for 60mm DIA tKnobler sets only):  Satin black, gloss red, or gloss white.

All Passage sets are also available in stainless steel with a satin bead-blasted finish. The 32mm DIA tKnobler set is available in solid bronze with an oil-rubbed finish.

*Please provide the required door thickness and handing information when ordering.

Designed by Piet Boon for Formani this complex, hand-made product is a truly stunning, unique design which is offered in three different expressions. First is the combination of stainless steel with natural oak; second is the line made from stainless steel and blackened oak; and third is the 100% stainless steel line.

A solid unsprung lever on a plate with natural beauty would be an asset to any interior.

Available with blank plate, keyhole plate, or profile cylinder plate.

Privacy sets also available.

Lever  120mm x 22mm        Plate  235mm x 40mm

Designed by Piet Boon for Formani this complex, hand-made product is a truly stunning, unique design which is offered in three different expressions. First is the combination of stainless steel with natural oak; second is the line made from stainless steel and blackened oak; and third is the 100% stainless steel line.

A solid sprung 'T' lever on a rose with natural beauty would be an asset to any interior.

Lever  100mm x 22mm        Rose  Ø50mm

This is the TWO PBWC23 turn and release bathroom privacy lock set designed by Piet Boon for Formani. The set comes with a 4mm spindle plus the sleeves that convert it to a 5mm, 6mm, 7mm or 8mm spindle as needed. It is only available in a brushed Stainless Steel finish.

Ø50mm

Designed by Piet Boon for Formani this complex, hand-made product is a truly stunning, unique design which is offered in three different expressions. First is the combination of stainless steel with natural oak; second is the line made from stainless steel and blackened oak; and third is the 100% stainless steel line.

A solid unsprung 'T' lever on a plate with natural beauty would be an asset to any interior.

Available with blank plate, keyhole plate, or profile cylinder plate.

Privacy sets also available.

Lever  100mm x 22mm        Plate  235mm x 40mm

Designed by Piet Boon for Formani this complex, hand-made product is a truly stunning, unique design which is offered in three different expressions. First is the combination of stainless steel with natural oak; second is the line made from stainless steel and blackened oak; and third is the 100% stainless steel line.

A solid double sprung lever with natural beauty would be an asset to any interior.

120mm x 22 mm lever on a 50mm Round Rose

Description

The versatile ball shaped door knob, available fixed or turnable on a rose.

Comes in 4 different finishes.

BASICS is a full collection of hardware and accessories for doors, window, and furniture/ cabinetry fittings and just about everything in between.

Comes as a single knob, fixed on rose with bolt through reverse pin M10-8x8mm.

Specifications:

Size:  Ø50 mm (2.0")  x  L 82 mm (3.25")   x   Rose Ø52mm

Privacy/ Lock Options:
LBN50 key escutcheon
LBY50 profile cylinder escutcheon
LBB50 blank escutcheon
LBWC50 turn and release set

Description

The versatile ball shaped door knob fixed on a rose. Available in 7 finishes.

BASICS is a full collection of hardware and accessories for doors, window, and furniture/ cabinetry fittings and just about everything in between.

Comes a single knob fixed on rose with bolt through reverse pin M10-8x8mm.

Specifications:

Size:  Ø 80 mm (3.1") X  L 82 mm (3.25") 

Privacy/ Lock Options:
LBN50 key escutcheon
LBY50 profile cylinder escutcheon
LBB50 blank escutcheon
LBWC50 turn and release set

Formani Eclipse Pull Handle - Rounded Corners

Dimensions:  Length 523m, Width 23mm, Projection 55mm, CC 500mm

Concealed Fixings: DR500NP

Bolt Through Fixings: DR500PS

Back To Back Set with Fixings: DR500PA

Formani Eclipse Pull Handle - Square Corners

Dimensions:  Length 523m, Width 23mm, Projection 55mm, CC 500mm

Concealed Fixings: DR500NP

Bolt Through Fixings: DR500PS

Back To Back Set with Fixings: DR500PA

This complete Entry door set includes a pair of steel tKnobler door levers with 4.8mm thick escutcheon plates, a TK thumb latch for the interior side of the door, and a cover plate for the edge of the door. Shown here in the blackened steel finish.

The tKnobler door pulls are offered in three sizes: 60mm DIA, 38mm DIA, or 32mm DIA.

Locking hardware includes an Accurate 9125 Series mortise lock, an Accurate 7200 Series deadlock, and a Baton AC31 keyed cylinder. Standard backset for the locks is 63.5mm; custom backsets are available if needed.

Standard finish for the tKnobler + Plate Entry door set is blackened steel, sealed with oil & wax. The jamb strike for all entry sets has a US10B oil-rubbed bronze finish. The 60mm DIA tKnobler + Plate Entry door set can be ordered in a powder coated finish, for better corrosion resistance.

Optional powder coat finishes (available for 60mm DIA tKnobler sets only):  Satin black, gloss red, or gloss white.

All Entry sets are also available in stainless steel with a satin bead-blasted finish. The 32mm DIA tKnobler set is available in solid bronze with an oil-rubbed finish.

*Please provide the required door thickness and handing information when ordering.

The Ballet Door Pull is made from solid brass, either in a Satin Polished Brass or Brown Bronze finish. Available in two sizes and can be fitted vertically or horizontally.

The Ballet Dressing Flush Pull is made from solid brass, either in a Satin Polished Brass or Brown Bronze finish. Suitable for 30+mm sliding doors.

The Ballet Edge Pull is made from solid brass, either in a Satin Polished Brass or Brown Bronze finish. Suitable for 40mm sliding doors.

The basic parts of the Divergence collection are made from black anodised aluminium. The sleeves of the handle are available in brass or aluminium. Wood, marble and glass are also available.

Sold as a pair

Dimensions:

Lever:  L-150mm  x D-63mm

Rose:  45 x 45 x 5mm

Imagined as "bubble dreams", India Mahdavi's Bubbles collection  embodies the alliance between simplicity and femininity, through the intersection of pure and absolute geometric shapes: the sphere and the cylinder.

Specifications

L 360mm  W 47mm  D 86mm

Other finishes are available on demand

Description:

Designer : Alexandre André

Dimensions : Thumbturn 38x25
                       Rose 45x45x8

Other finishes are available on demand

Pierre Daems is always on the search of the appropriate balance between straight lines and curves, textures and finishing touches.

His love for materials and Arts and Crafts is rooted in Belgium, the Art Deco environment in which he grew up and the surrounding design landscape leaving sparks of inspiration. The architectural, intuitive approach to design results in high-end one-of-a-kind objects and interiors.

Pierre Daems specialises in exclusive interior design and tailor-made furniture. His signature is the balance between vital and gentle, sophisticated and straightforward. Every design has the same tactile nature, reflecting his boundless creativity and a particular eye for detail. These objects, between function and decoration, stand perfectly well on their own and add character to any interior. 

Dimensions:

Thumbturn 40x17x38 (LxWxD)
Studio square rose 45x45x5

Pierre Daems is always on the search of the appropriate balance between straight lines and curves, textures and finishing touches.

His love for materials and Arts and Crafts is rooted in Belgium, the Art Deco environment in which he grew up and the surrounding design landscape leaving sparks of inspiration. The architectural, intuitive approach to design results in high-end one-of-a-kind objects and interiors.

Pierre Daems specialises in exclusive interior design and tailor-made furniture. His signature is the balance between vital and gentle, sophisticated and straightforward. Every design has the same tactile nature, reflecting his boundless creativity and a particular eye for detail. These objects, between function and decoration, stand perfectly well on their own and add character to any interior. 

Dimensions:

Lever 130x20x60 mm (LxWxD)
Studio square rose 45x45x5 mm

Other finishes available on demand.

"Euclide" is a structural, masculine and geometrical collection.The mixture of the round and square lines gives to the pieces a glimpse of clumsiness which makes them irresistibly adorable.
The door handle collection is built with a circle inscribed in a square. In geometry, the incircle or inscribed circle of a polygon is the largest circle contained in this polygon; it touches and is tangent to the all sides. The center of the incircle is called the incenter.

Made from Solid Brass with a polished nickel finish.

Sold as a pair

Dimensions-   L: 120mm   x    D: 66m

Beautiful rounded butt hinges with ball bearings available in a range of finishes to compliment the lever or lock finish.

Dimensions: 76mm x 76mm